Hub20

Hub20 – the ultimate numpad or macro pad, loaded with features:

• Left and Right handed layouts supported, along with a 4×5 1U grid enabling it to be used as a macro pad.
• Two rotary encoders, enabling intuitive controls for a wide range of tools including CAD and photo / video editing.
• Inbuilt USB 2.0 Hub with Type-C connectors, allowing connection to other keyboards, memory sticks, wireless receivers and more!
• VIA and QMK compatibility, including a “macro” mode enabling the keys to be remapped on a host computer.
• 27 addressable RGB leds, including one under each key.

Note: Unlike the Hub16, soldering will be required for this PCB.

What’s included:

Everything but the switches, stabilizers, and keycaps!

• Professionally designed and assembled keyboard PCB
• Top cover / Plate PCB
• Laser cut acrylic – 4 pieces
• 2 * Rotary encoders
• 2 * Rotary encoder knobs
• 4 * 4mm M2 cap head bolts
• 4 * 8mm M2 cap head bolts
• 4 * 8mm female threaded standoffs
• 4 * Rubber feet

What you’ll need:

• 20 * Cherry MX Key Switches
• 20 * 1U Cherry MX Keycaps
• Soldering iron and solder
• 1.5mm allen key

Notes on the USB Hub

The hub is a four port USB 2.0 Hub with Type-C connectors, aimed at allowing connection of keyboards, mice, memory sticks, wireless receivers, and other small devices (including a second Hub!) to your computer.

Due to cost and space constraints, the Hub has some limitations. The Hub is not:

• USB 3.x, Power Delivery, Thunderbolt, DisplayPort, etc compatible.
• Designed to charge your phone quickly. Only 100mA is guaranteed per port.
• Designed to work with power hungry devices such as spinning hard drives.
• Guaranteed to provide full USB 2.0 speeds and performance on all ports.